Propulsion Control System

The availability of propulsion power is vital for keeping a vessel and its systems operational. The Rhodium Propulsion Control System (PCS) is employed for the generation and distribution of propulsion power supply to the ship in accordance with the various operational readiness conditions.

The Rhodium PCS is an independent and fully autonomous stand-alone system consisting of dedicated Local Processing Units (LPU’s) per propulsion shaft, with each LPU interfacing with the engines, clutches, gearbox, CPP and other propulsion systems. The Rhodium PCS is controlled via PCS control panels in the wheelhouse and the control room.


  • Support for multiple propulsion configurations
  • Machinery control
  • Overload protection
  • Different operation modes
  • Integration with AMCS, PMS and DPT

Support for multiple propulsion configurations

The Rhodium PCS system supports different propulsion configurations. These configurations vary from a single-engine fixed pitch propeller, to a complex combined diesel and gas turbine (CODAG) configuration. The operator can select the actual selection of propulsors via the PCS panel. Control of clutches and shaft breaks to activate each configuration is done automatically by the PCS, including adjusting the combinatory curve accordingly.

Machinery control

The Rhodium PCS provides controls for starting and stopping the engines. Starting an engine is only possible after release by means of a key switch. For gas turbines, an extra dry-start control is available (start cycle without fuel). Overriding the start conditions is possible via dedicated key switches. Stopping an engine is executed including a (manufacturer required) cool-down period of the engine.

Overload protection

Should the engine be overloaded by the CPP, the PCS will decrease the pitch of the CPP. Decreasing the CPP pitch results in a lower load demand on the engine(s) and therefore prevents overloading the engines.

Different operation modes

The Rhodium PCS allows the operator to select various operation modes, in order to establish optimal engine / CPP load control. Each operation mode comprises a specific combinatory curve. Typical operation modes are Manoeuvring, Transit, Towing and Loitering.

Integrated with AMCS, PMS and DPT

The Rhodium PCS system offers full integration with the Rhodium AMCS, PMS and DPT systems. Besides the PCS control panels, the Rhodium PCS can also be controlled and monitored via dedicated viewers in the AMCS. This means the operator does not have to physically be at the PCS control panel.

The integration with PMS systems guarantees full support for electrical and hybrid propulsion systems. The integration with DPT systems allows the PCS to be controlled for position holding and speed keeping.

Contact us

For more information about our Rhodium Ship automation products:

Frank Soonieus | RH Marine

Frank Soonieus

Product Manager Ship Automation

This RH Marine website uses cookies for example to improve and analyze the website, for social media and to ensure that you see relevant ads. To learn more about cookies, click on Cookie Policy. When you click on accept, you authorize RH Marine to use the cookies as set for our website.